MJ series jaw crusher is mainly used as coarse crusher. It is made of advanced technology in Europe and America and high-quality wear-resistant raw materials. The equipment has good performance, large crushing ratio and high output. It mainly deals with high strength and high hardness materials. It is the primary equipment of mine crushing production line and lays a good foundation for subsequent equipment. The design of this new type of jawbone structure is more scientific and reasonable, and the operation parameters, structural form, maintenance and adjustment of the equipment have more advantages than traditional machines.
When MJ series jaw crusher works, the motor drives the belt and pulley to make the moving jaw move up and down through the eccentric shaft. When the moving jaw rises, the angle between the elbow plate and the moving jaw becomes larger, so as to push the moving jaw plate close to the fixed jaw plate, and at the same time, the material is crushed or split to achieve the purpose of crushing; When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate leaves the fixed jaw plate under the action of the pull rod and the spring. At this time, the crushed materials are discharged from the lower opening of the crushing cavity.
|Model||Feed opening size(mm)||Power(KW)||Discharge size(mm)||Weight (kg)|
Remarks: The output in the table is based on the approximate throughput measured by the loose density of the material at 1600KG/m3. The actual result will be different due to the difference in feed, particle size, rock type and material moisture content.